News from kb8ojh.net

posted 2011-04-24 at 21:42:

A new MSP430 page which isn't very MSP430-specific is up, detailing an encoding for mapping ASCII to Morse Code. This example isn't very useful by itself, but I'll be using it in some upcoming examples for a Morse Code LED beacon which will ultimately (I hope) turn into a flexible and powerful QRP beacon firmware.

In addition, a new tip has gone up on the MSP430 Tips & Tricks page, containing just enough information to get you started figuring out why your firmware image uses more RAM or FLASH than you think it should.

path: /resources | permanent link to this entry